Ecler WARM4
Four Channel Analogue Rotary Mixer
- 4 Mixing channels.
- 4 PHONO inputs.
- 4 LINE inputs.
- 2 MICRO inputs.
- Master Output on XLR and RCA connectors.
- Booth Output on XLR and RCA connectors.
- Headphone Monitor Output on 6.3mm J ack and 3.5mm mini-jack.
- 3 band isolator full cut EQ.
- 3 band isolator (300Hz and 4KHz, - /+12dB, 4th order
24dB/oct ).
Analogue Subharmonic Synthesizer for sub-bass
frequency reinforcement selectable per channel. - Maximum Output without distortion: 21dBV (23dBu).
- FX Send control and Pre/Post fader selector per channel.
- FX Return control and PFL.
- Alps metal shaft high quality potentiometers.
- Mechanized from a solid block of aluminum knob, without
visible screw. Ecler Unique design. - Wooden side panels included
WARM4 is a high-quality rotary DJ mixer produced by ECLER in Barcelona, tailored for professional use. It boasts four channels, each equipped with phono/line inputs, along with two MIC inputs. The mixer incorporates classic sharp filters and a 4th order Isolator, ensuring precise sound shaping capabilities. Notably, WARM4 also introduces a distinctive feature: an Analogue Subharmonic Synthesizer that can be individually selected for each channel. This synthesizer is specifically designed to generate and enhance ultra-low frequencies, providing a unique and powerful audio experience.
WARM4
AUDIO PERFORMANCES
Inputs
Number of Inputs LINE 4 Stereo Unbalanced Inputs
PHONO 4 Stereo Unbalanced Inputs
MICRO 2 Mono Balanced Inputs
FX RETURN 1 Stereo Unbalanced Input
Connectors type LINE 1-2-3-4 RCA STEREO
PHONO 1-2-3-4 RCA STEREO
MICRO 3 XLR3-F
MICRO 4 Combo XLR3F-6.3mm TRS BAL
FX RETURN RCA STEREO
Inputs Sensitivity nom/Impedance LINE 0dBV/50k
PHONO -40dBV/50k
MICRO -50dBV/>1k
FX RETURN 0dBV/>6k
Performances
Frequency Response LINE 10Hz÷30kHz -1dB
MICRO 10Hz÷25kHz -1dB
PHONO RIAA ±0.5dB
FX RETURN 10Hz÷50kHz -1dB
THD+N LINE <0.004%
MICRO <0.7%
PHONO <0.06%
FX RETURN <0.001%
CMMR MICRO >75dB @ 1kHz
Signal Noise Ratio LINE >105dB
MICRO >90dB
PHONO >100dB
FX RETURN >110dB
Trim control INPUTS 1-2-3-4 ± 15dB
Tone control Inputs 1-2-3-4 BASS +10/-30dB
MID +10/-25dB
TREBLE +10/-30dB
Tone control Isolator BASS +12/-70dB
MID +12/-40dB
TREBLE +12/-70dB
one Filter cut frequency at -6dB
(slope 12dB/oct)
BASS
MID
200Hz
200Hz÷6.8kHz
TREBLE 6.8kHz
Isolator cut frequency at -6dB
(slope 24dB/oct)
BASS
MID
300Hz÷4kHz
TREBLE 4kHz
Analogue Subharmonic Synthesizer Input selective filter 50÷120Hz
Harmonics
synthesis
25÷60Hz
Max Output level +12dBV
Outputs
Number of Outputs HOUSE 1 Stereo Balanced Outputs
1 Stereo Unbalanced Outputs
BOOTH 1 Stereo Balanced Outputs
1 Stereo Unbalanced Outputs
HEADPHONE 2 Stereo Unbalanced Outputs
FX SEND 1 Stereo Unbalanced
REC 1 Stereo Unbalanced
Connectors Type HOUSE XLR3-M STEREO
RCA STEREO
BOOTH XLR3-M STEREO
RCA STEREO
HEADPHONE J ack Stereo 6.3mm
J ack Stereo 3.5mm
FX SEND RCA STEREO
REC RCA STEREO
Outputs Level/Minimum Load HOUSE (BAL) 0dBV/600 1V *(+12dB 4V)
HOUSE (UNBAL) 0dBV/2.2k 1V *(+12dB 4V)
BOOTH (BAL) 0dBV/2.2k 1V *(+12dB 4V)
BOOTH (UNBAL) 0dBV/2.2k 1V *(+12dB 4V)
REC 0dBV/10k
HEADPHONES 200m/200 THD 1%
FX SEND 0dBV/2.2k
Max Undistorted Output Level HOUSE (Electr.BAL) 21dBV (23dBu)
BOOTH (Electr.BAL) 21dBV (23dBu)
HOUSE (UNBAL) 21dBV (23dBu)
BOOTH (UNBAL) 21dBV (23dBu)