IK Multimedia iRig Pro I/O

The Ultra-Compact Audio/MIDI Interface for All Your Gear
Record on the go with any of your gear and monitor in real-time with any compatible device using the iRig Pro I/O, an ultra-compact, professional-quality audio and MIDI interface designed for mobile recording.

Building on the success of its predecessor, the iRig Pro, this next-generation interface allows you to connect all your studio equipment—whether it's a microphone, guitar, keyboard, or MIDI controller—to your iPhone, iPad, Mac, PC, or Android device for seamless recording anywhere.

Pocket-Sized Powerhouse
The iRig Pro I/O delivers 24-bit/96kHz studio-quality sound in a pocket-sized format, with additional features to enhance mobile recording. It’s plug-and-play, allowing you to easily connect studio microphones, performance mics, guitars, basses, keyboards, and more. Plus, it includes a new 1/8" stereo headphone output with preamp and level control, making it fully compatible with the latest iOS devices. With the optional DC power supply, it even charges your iPhone or iPad during use for uninterrupted recording sessions. The addition of a MIDI Out jack provides even greater flexibility for controlling external MIDI gear.

TONEX SE Included
iRig Pro I/O now comes with TONEX SE, allowing you to model the sound of any amp, cabinet, combo, or pedal and turn it into a plug-in for Mac/PC, iPhone, or iPad. Dive into ToneNET and IK’s new TONEX Signature and Tone Partner Collections to discover iconic gear and sounds.

All Your Gear, All the Time
The iRig Pro I/O is designed to handle all your equipment, from studio and vocal mics to guitars, keyboards, and MIDI controllers. Featuring 24-bit A/D and D/A converters and a 96kHz sample rate, it provides professional-quality audio wherever you are. For condenser mics, it supplies 48V phantom power through the XLR jack, and the calibrated gain control knob lets you easily adjust and recall settings. Its 1/4" Hi-Z input handles both passive and active pickups, with a precise gain dial for the perfect input signal every time.

Use Your Studio Mics Anywhere
With onboard 48V phantom power, iRig Pro I/O lets you use any microphone you own, whether in the studio or on location. The Neutrik XLR and 1/4" combo input jack and oversized gain knob make it easy to plug in, adjust gain, and start recording without hassle.

Enhanced Monitoring and MIDI Flexibility
The iRig Pro I/O features a 1/8" stereo headphone output with preamp and level control, so you can monitor your recordings with professional depth and headroom on any device, even newer iPhones and iPads. Additionally, the interface includes both MIDI In and MIDI Out (thru) jacks, allowing for more flexible routing and control of external MIDI gear like keyboards, controllers, and sound modules. MIDI cables are included for easy connection.

Flexible Power Options
Powering the iRig Pro I/O depends on your setup. For iPhone, iPad, or Android devices, it runs on 2 AA batteries, which also provide 48V phantom power for condenser mics. When connected to the optional iRig PSU 3A power supply, it can charge your device during use, ensuring continuous recording. For Mac/PC users, the interface draws power from the connected USB port, making it ready to go whenever you are.

In summary, the iRig Pro I/O is the most versatile, intuitive mobile audio and MIDI interface available, offering professional-grade sound quality, robust connectivity, and seamless portability.

Microphone Input

• Microphone Input: balanced female 3-pin, XLR. Pin 2: hot / Pin 3: cold / Pin 1: ground
• Microphone Input Level: from 6 mVpp to 1.4 Vpp
• Microphone Input Impedance: 3.2 kOhms
• Gain Range: 40 dB
• Phantom Power: +48V ± 4V
• Frequency Response: 20 Hz - 20 kHz +/-1.5dB
• Input Noise: -103 dB(A), -97 dB RMS

Instrument Input

• Instrument Input: unbalanced, Hi-Z, TS 1/4" Jack, Tip: signal / Shield: ground
• Instrument Input Level: from 30 mVpp to 6.9 Vpp
• Instrument Input Impedance: 1 MOhms
• Gain Range: 27 dB
• Frequency Response: 20 Hz - 20 kHz +/-1.5dB
• Input Noise: -103 dB(A), -97 dB RMS

Stereo Headphone Output

• Connector: 1/8" TRS Jack. Tip: right / Ring: left / Shield: ground
• Headphone Level Control numbered thumbwheel
• Headphone Level Power 100mW into 50 Ohms

Stereo Headphone Output

• Connector: 1/8" TRS Jack. Tip: right / Ring: left / Shield: ground
• Headphone Level Power 100mW into 50 Ohms

MIDI Input/Output

• Connector: 2x2.5mm TS Jack

Other Input/Output

• DC barrel: 1x DC barrel. For power and device charging.
• Device Connector: mini-DIN

Common

• Conversion: 24-bit A/D, 24-bit D/A
• Sampling Rate: 44.1 kHz, 48 kHz, 88.2 kHz and 96 kHz
• Power:
  - USB bus powered when used with a computer
  - Battery powered (2xAA included) when used with an iOS device
  - DC power supply (not included, iRig PSU 3A sold separately)*

Package includes

• iRig Pro I/O universal Audio-MIDI interface
• Lightning to Mini-DIN connection cable with charging features (60cm/23.62")
• USB-A to Mini-DIN connection cable (60cm/23.62")
• USB-C to Mini-DIN connection cable (60cm/23.62")
• 2.5mm TRS male to MIDI female adapter (10cm / 3.9")
• 2 x 1.5V AA Battery
• Velcro strip

Dimensions

• Size: 43mm/1.69" x 127mm/5" x 37mm/1.46"
• Weight: ~120g/4.23oz (batteries excluded)

Compatibility

iOS Devices

Made for: iPhone 7 Plus, iPhone 7, iPhone SE, iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5, iPod touch 6th generation, iPod touch 5th generation, iPad Pro (12.9-inch), iPad mini 4, iPad Air 2, iPad mini 3, iPad Air, iPad mini 2, iPad mini, iPad 4th generation.

Also compatible with all newer iPhone, iPad and iPod touch models.

Computers

Mac®: Mac OS X 10.6 or later. One free USB port.

Windows®: One free USB port. For low latency, the IK Multimedia's iRig audio driver must be installed. Download the iRig ASIO driver here.

Android Devices

Compatible with Android devices running Android 5 or later and with USB digital audio capabilities.
Micro-USB-OTG to Mini-DIN cable (sold separately) is required.

* Use only the specified AC adaptor
Use only the specified AC adaptor (iRig PSU 3A) and make sure the line voltage at the installation matches the input voltage specified on the AC adaptor's body. IK Multimedia will not be responsible of any damage caused by usage of any AC adaptor other than the specified one (iRig PSU 3A). The usage of AC adaptors other than the specified one (iRig PSU 3A) could compromise the user experience in terms of: Safety risk, Apple device charging performances, Noise performances.