Reloop RP-2000 MK2 Turntable

The Reloop RP-2000 MK2 is a reliable, quartz-driven turntable. It features a direct drive motor which allows for motor force to be directly transferred to the drive hub. Therefore, higher torque generates power at a faster rate. You can also fine-tune the pitch with precision using the +/- 8% adjustable pitch control.

The RP-2000 MK2 is supplied with a superb quality hand-made Ortofon OM Black pick-up, already mounted to a headshell and ready for playback straight away. 

The s-shaped tone arm is equipped with hydraulic lift and an anti-skating mechanism, plus a universal SME connection which allows for a wide range of pick-up cartridges to be connected.

An improvement on the RP-2000, this turntable also has a newly-developed top panel with high-quality tactile metallic buttons for a superior feel, and sturdy construction for optimum durability.

The RP-2000 MK2 is a dependable turntable for prospective DJs. The MK2 version features several improvements, including a newly developed top panel construction and improved metallic buttons with enhanced feel.

Compared to belt-driven turntables, the RP-2000 MK2 transfers its motor force directly to the drive hub this way a higher torque generates power faster on the precision-engineered platter with minimal wow and flutter. The adjustable pitch control with a range of +/- 8 % is suitable for the finest pitch adjustments.

The RP-2000 MK2 features a statically balanced s-shaped tone arm with hydraulic lift and anti-skating mechanism. Thanks to the universal SME connection, a large number of pick-up cartridges can be connected.

The new deep-black metallic top panel is equipped with metallic buttons for start/stop and speed settings. The improved touch upon hit offers a clear haptic feedback. With the push of a button the aluminium target light can be extended, so that the needle position can be seen in dark surroundings. The sturdy construction with optimized damping features and shock-absorbing feet improve isolation from unwanted vibrations.

The RP-2000 MK2 comes with the high-quality OM Black pick-up, handmade by Ortofon in Denmark, pre-fitted to a headshell ready for immediate playback.

Turntable:

• Type: direct drive turntable
• Drive: quarz-driven direct drive
• Motor: 8-pol., 2-phase, brushless DC motor
• Turntable speeds: 2 speeds, manual (33 1/3, 45 RPM)
• Starting torque: > 1kg/cm
• Brake time: < 1 sec.
• Start-up / rpm change: < 1 sec.
• Wow and flutter: < 0.15% WRMS
• Signal-to-noise ratio: > 50 dB (DIN-B)
• Brake system: electronic brake

Platter:

• Material: aluminium die-cast
• Diameter: 332 mm
• Tone arm:
• Type: universal, statically balanced, s-shaped
• Effective length: 230.5 mm
• Overhang: 16 mm
• Tracking angle error: < 3°
• Applicable pick-up weight: 3.5 8.5 g (incl. headshell 13 18 g)
• Anti-skating range: 0 - 7 g

Connections:

• 1x PHONO out (gold-plated), 1x GND

General:

• Power supply: AC 115/230 V, 60/50 Hz (US/EU)
• Power consumption: 13 W
• Dimensions: 450 (w) x 352 (d) x 144 (h) mm
• Weight: appr. 6.75 kg